NOTE, Important!
When installing on trailers with steerable axles – Do not forget to connect the reversing light signal
What is the annual maintenance you need to do?
Make sure that bolt joints, box, push buttons, lock seal, battery fastening, etc. are not damaged or have come loose.
Make sure that wires, connectors, battery poles, etc. are not damaged or oxidized, etc.
To prevent corrosion, cable shoes, connectors, battery poles, etc. should be lubricated with contact grease, white Vaseline el dyl.
Check the capacity of the batteries by load tests with the intended test equipment. Recomability is also to start P-LIGHT® and leave the lighting/option on until the electronics turn off P-LIGHTitself®. In this way, the p-LIGHT control ® has sufficient battery capacity for the intended needs (+ margin).
Important! Since the batteries over time lose capacity (like all rechargeable batteries), you have to perform battery tests so you know when it's time to change. If you do so, it may result in P-LIGHT® may not be able to shine the time you expect when you put the trailer/trailer in case of a short-term parking. I'm going to change your batteries on time!
Download Hydraulic Engine Service Schedule here
Other questions, please contact our support by email support@innonet.se or by phone 0472-48393