P-LIGHT Charging Kit
The battery charger is designed for both internal and external mounting on vehicles, and the installation instructions must be followed for approved installation. The charger is intended for rechargeable lead-acid batteries with a capacity greater than 30Ah, and is approved for permanent installation in motor vehicles with a 24V electrical system and negative ground (minus to ground).
When charging, there is no need to unscrew the battery cell plugs or disconnect the battery cables. The charger is designed to charge at low temperatures.
The battery manufacturer's instructions for maintenance, refilling with distilled water, cleaning, etc. must be followed.
The battery charger has an electronically controlled charging curve with advanced charging technology that protects the battery from overcharging and allows it to be connected for long periods of time.
Technical data IE8700-12
– for 24 V DC systems
– input voltage 230 V, power 300 W max. 2A
– charging voltage 28.8 V / 27.6 V (fast/slow)
– charging current 12 A
– recommended battery capacity 30-300 Ah (suitable for
lead batteries including AGM batteries)
– built-in protection against short circuit and incorrect connection
– 20 A fuse on the 24 V side
– 24 V connection cables 1.5 m, M8 ring cable lug
– operating temperature -40…+60 °C
– Protection class IP46
– Dimensions L 192 x W 98 x H 49 mm
– Weight 1.5 kg